Medical Device Marketing Consultant: What to Hire For

Trent Warner
All posts

A medical device marketing consultant helps a medtech company decide who to sell to, what to say and how to launch. This post is for companies that make and sell devices, not for practices, clinics or hospitals. Whether you need a consultant depends on what is missing: a plan, someone to fulfill the plan, or someone who owns the whole thing.

The hire goes wrong when the title and the job do not match. A consultant hands you a plan. An agency runs channels. A fractional CMO owns the system and builds the team that runs it. Hire for the job, not the title.

You can't hire just anyone to run your marketing strategy. They need to know the medtech ecosystem and the compliance rules that come with it. King & Spalding's 2025 review counted 32 FDA Warning Letters over medical device marketing violations. In one group of them, FDA found that claims on company websites reflected intended uses outside the device's exempt classification.

Book a 15-Min Call

What does a medical device marketing consultant do?

A medical device marketing consultant builds the plan for a medtech company: who the buyers are, how to position the device, how to launch it and what to say. The job ends with the plan unless the scope says otherwise. They cover:

  • A market and buyer map: who buys, who influences the purchase, who can block it.
  • Positioning: why your device, for this use, over what they use today.
  • A launch plan: what happens before, during and after the first sales.
  • Messaging written to survive claims review.
  • A product education plan, covered below.

That is a fair deal if you have a marketing lead and a team who can carry a plan out. It is a poor one if the plan lands on a founder who is also running sales and regulatory.

I am not a consultant. I am a fractional CMO. What makes me different from most fractional CMOs is that I am fine rolling up my sleeves to build, and I have a deep bench of specialists I can call on to get projects done if you are not ready to hire.

What makes medical device marketing different?

Two things change the job. Claims go through compliance checks against FDA requirements, and some products have to be taught before anyone can use them well. I have experience with both of these situations with my medical device clients.

Claims get checked. With these clients, every claim went through compliance checks against FDA requirements before it shipped. FDA's regulation on intended use says a company's intent for its device can be shown by labeling claims, advertising matter, or oral or written statements by the company or its representatives. That covers more than the label. This is a description of the rule, not legal advice, and your regulatory lead or counsel makes the call on any claim. A good marketing hire builds that review step into the plan. Prior to launch, I was in constant and direct contact with my client's regulatory lead.

The product has to be taught. For one of those products, the use had to be taught, so we built a whole certification and product education knowledge base before it was widely used. I had to become intimately familiar with the product in order to teach it. And teaching it at scale involves feedback testing.

Both of those change what you hire for. A consultant who hands you a launch plan with no claims step has handed you a plan for a different industry. If your device has to be taught, the same goes for a plan with no education step.

Consultant, agency or fractional CMO: which one do you need?

You need a consultant if you are missing a plan, an agency if you have a plan and no hands, and a fractional CMO if nobody owns marketing. Each one owns a different thing. Here is how I separate them:

ConsultantAgencyFractional CMO
OwnsThe planChannels and campaignsThe whole system and the team
What to ask for after 30 daysA strategy documentCampaigns being builtGoals, a diagnosis and a plan
Fits whenYou have people to run itYou have a plan and need handsYou have neither, or nobody owns it

For the agency side of this split, I wrote a longer comparison: fractional CMO vs marketing agency.

Ask who is accountable for marketing results in 90 days. If the answer is "me, between everything else," the missing piece is an owner. A plan will not fix that, and neither will more channels.

When should a medtech company bring in outside marketing help?

These are the four moments I would look at:

  • Before a launch or a new indication. Messaging, claims review and the education plan take time. Start them before the date.
  • After a first launch. The market has now answered. Whether the next push needs different messaging, different channels or better handoffs between them, someone has to look at all of it.
  • Before a raise. A raise needs a growth story, and someone who owns it.
  • When the first sales hires start. Reps need material and a steady way to get conversations started.

What does it cost?

Consultants and agencies price by scope, so compare what each one owns before you compare numbers. My own pricing is public. Retainers run $5K to $15K a month, set by how much of marketing I own, in three levels:

  • Lead, $5K to $7.5K a month: I own the strategy and the number that matters most, your north star metric, and I tie the plan to revenue growth. Your people do the work.
  • Lead and build, $7.5K to $10K a month: everything in Lead, plus the customer journey, the team structure and the weekly rhythm, so the plan actually gets done.
  • Run marketing, $10K to $15K a month: everything above, plus I run the work hands-on, and every month I review results with your leadership and get their sign-off.

No marketing team yet? Most founders in this spot start at Lead and build, and the plan includes hiring your first freelancer or assistant so the work does not stop with me. Ad spend, software and freelancers or vendors are paid separately. The full scope is on the fractional CMO page.

For a consultant or an agency, ask for the scope in writing before you compare prices. A low number for a plan and a low number for running a function are not the same thing.

What should you ask before you hire one?

Five questions, each with the proof to ask for:

  1. Who owns the result? Ask for the name of the person accountable at 90 days.
  2. What will exist after the first 30 days? Ask for the deliverables, named.
  3. How do you handle claims review? Ask to see where it sits in their process, and who signs off on your side.
  4. How will the product get taught? Ask for an education plan that matches how your device is used.
  5. Who does the work? Ask whether the person you meet is the person you work with.

My longer vetting list is in how to choose a fractional CMO. The monthly work behind the CMO option is in what a fractional CMO does.

What does it look like for a medtech company with no marketing team?

Illustration only (hypothetical). Dana is the founder of a device company with a cleared product, three sales reps and no marketing staff. A new indication launches in six months. She wants it to land with hospital buyers and referring clinicians, and she has no one to own the work.

She picks Lead and build at $8,500 a month, on the 3-month initial commitment. She also pays a freelancer $3,000 a month to produce education content, and $500 a month for software. Both are separate from the retainer.

  • Month 1: Dana knows her goals, what is holding growth back and what to do first. Claims review is written into the plan, with her regulatory lead as the sign-off.
  • Month 2: The customer journey and the team structure are mapped, so everyone knows who does what. The freelancer starts, and the first education modules go into review.
  • Month 3: The weekly rhythm is running: one growth meeting a week and one place the team works. The first modules are live, and the scorecard tracks them every week.

Cost for the three months: $8,500 retainer, $3,000 freelancer and $500 software is $12,000 a month, or $36,000. Of that, $25,500 is the retainer.

How do I work with a company like this?

I work with medtech and healthtech companies, and clients work with me directly, not a handed-off junior. In the first 30 days you get clear goals, a diagnosis of what is holding growth back and a plan to fix it. From day 31 to 90, we run the plan and build the team around it. If you are deciding between a consultant, an agency and a hire, the fractional CMO page shows what I own at each level.

Not sure which one you are missing? Book a 15-Min Call and we will work out whether it is a plan, hands or an owner.

FAQ

What does a medical device marketing consultant do?

A medical device marketing consultant builds the plan: who your buyers are, how to position the device, how to launch it and what to say. Execution is yours unless the scope says otherwise. It fits when you already have people who can carry the plan out.

How much does a medical device marketing consultant cost?

It depends on scope, so ask for the scope in writing before you compare prices. For comparison, my fractional CMO retainers run $5K to $15K a month, set by how much of marketing I own.

Consultant, agency or fractional CMO: which does a medtech company need?

A consultant fits when you are missing a plan. An agency fits when you have a plan and need hands. A fractional CMO fits when nobody owns marketing, because they own the system and build the team that runs it.

When should a medtech company bring in outside marketing help?

Before a launch or a new indication, after a first launch, before a raise, and when the first sales hires start.

Trent Warner